When building a hay feeder, keep in mind that the size and style will depend on the type of bale that you use. You want the hay feeder to be at least 2 feet deep and high enough on the sides and back to allow the cows to reach the hay without any difficulty. It should also have angled feeding slats on the back to prevent the cows from pulling the hay out. The hay feeder should also have a roof over it.
Contents
Cone style hay feeder
The Cone style hay feeder has several benefits over traditional round bale feeders. One of these benefits is reduced waste. Studies have shown that using a Cone style hay feeder reduces waste by five to six percent of the bale’s weight. In comparison, using a ring feeder resulted in a waste of up to 21 percent.
Another benefit of the cone style feeder is its ease of use. It can accommodate 6′ bales and can feed up to 18 calves at a time. Its overall height is six feet and it requires twenty seven/16″ hex head bolts. It has three sides, and each of them is bolted solid until the fourth side is installed.
Steel-tube hay feeder
A Steel-tube hay feeder is a durable and sturdy choice for feeding your cows. It features a 1/8-inch steel frame that is ideally suited for years of farm use. It is available with various features, including EZ Clean-Out racks for easy cleaning. Other options include galvanized sheet inserts for silage and TMR hay. While these feeders may not be the cheapest in the market, they will more than pay for themselves in hay savings within a few years.
The Titan Galvanized Cattle Feeder by Tarter is 8′ in diameter and is designed to hold large round bales. Its s-bar design helps prevent calves from getting stuck inside the feeder. It is made of sturdy, 1 3/4-inch steel tubing, and comes with bolts. Note: The Titan Galvanized Cattle Feeder is not suitable for horses.
Double-sided hay feeder
A double-sided hay feeder for cows is a convenient way to feed your livestock. Its design features a slanted top rail that prevents your cattle from eating hay that falls outside of the feeder. Heavy duty vertical rails support the feeder on both sides. These feeders are also available with a meshed back panel or hook over design.
A double-sided hay feeder is an efficient way to feed cattle and reduces waste by up to 50%. It also offers an optional hay rack, minimizing the amount of hay wasted. While a double-sided feeder costs more up front than a wheeled feeder, it will save you money in the long run.
Crib hay feeder
Crib hay feeders are great for feeding several types of livestock at one time. A hay feeder with plenty of room for a number of different animals is a good choice for feeding cows and sheep. These feeders are easily portable and are usually made of treated wood. They can be made with open tops or with a grate on top. This type of feeder will be easy to clean and maintain.
The first step is to make the frame. You’ll need two pieces of 2x4s (cut lengthwise so that the wooden sides are not exposed) and one piece of metal. Once you’ve made the frame, you’ll need to fit the sides of the hay feeder to the bars. Use two-inch screws to secure the bars to the frame. You can also use bricks or wood blocks to secure the bottom section.
Double-sided hay feeder for goats
A double-sided hay feeder is one of the most versatile feeding options for goats. This sturdy feeder comes with an adjustable height, two metal hooks, and a base that prevents hay from falling. It’s the perfect choice for goats and other medium-sized animals. It also comes with a galvanized feed pan that will last for years without maintenance.
To make a double-sided hay feeder, start by measuring and preparing the materials you’ll need. A plywood sheet and 2×4 wood pieces can be used. You’ll also need some wood glue and wood screws. The finished product is relatively simple to assemble and is easy to clean.
